110 C. Pappalettere 50. Stefanescu, D., Truman, C.E., Smith, D.J., Whitehead, P.S.: Improvements in residual stress measurement by the incremental centre hole drilling technique. Exp. Mech. 46(4), 417–427 (2006) 51. Kim, K.S., Choi, S.B., Lee, J.H., Park, S.M., Kim, B.I., Lee, N.H., Lee, C.H., Woo, M.: A study on measurement of welding residual stress using ESPI system. Key Eng. Mater. 324–325, 859–862 (2006) 52. Lobanov, L.M., Pivtorak, V.A., Savitsky, V.V., Tkachuk, G.I.: Technology and equipment for determination of residual stresses in welded structures based on the application of electron speckle-interferometry. Mater. Sci. Forum. 768–769, 166–173 (2014) 53. Viotti, M.R., Albertazzi, A.: Compact sensor combining digital speckle pattern interferometry and the hole-drilling technique to measure nonuniform residual stress field. Opt. Eng. 52(10), 1–8 (2013) 54. Kim, K., Choi, T., Na, M.G., Jung, H.: Residual stress measurement on the butt-welded area by electronic speckle pattern interferometry. Nucl. Eng. Technol. 47(1), 115–125 (2015) 55. Craft, S., Ghimire, S., Ghimire, B., Yoshida, S., Sasaki, T.: Optical analysis of weld-induced residual stress by electronic speckle-pattern interferometry. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 9, pp. 217–323 (2014) 56. Casavola, C., Cazzato, A., Moramarco, V., Pappalettera, G.: Preliminary study on residual stress in FDM parts. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 9, pp. 91–96 (2017) 57. Casavola, C., Cazzato, A., Moramarco, V., Pappalettera, G.: Residual stress measurement in fused deposition modelling parts. Polym. Test. 58, 249–255 (2017) 58. Casavola, C., Cazzato, A., Moramarco, V., Pappalettere, C.: Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory. Mater. Des. 90, 453–458 (2016) 59. Laakkonen, M., Rickert, T., Suominen, L.: Stress measurements in glass and plastic by optical hole-drilling. Mater. Sci. Forum. 768–769, 95–100 (2014) 60. Takeda, K., Hayashi, S., Ueki, K.: Deformation properties of 3D printed shape memory polymer. Key Eng. Mater. 725, 378–382 (2017) 61. Montay, G., Sicot, O., Maras, A., Rouhaud, E., Francois, M.: Two dimensions residual stresses analysis through incremental groove machining combined with electronic speckle pattern interferometry. Exp. Mech. 49, 459–469 (2009) 62. Schajer, G.S., An, Y.: Residual stress determination using cross-slitting and dual-Axis ESPI. Exp. Mech. 50(2), 169–177 (2010) 63. Schajer, G.S., Steinzig, M.: Dual-axis hole-drilling ESPI residual stress measurements. J. Eng. Mater. Technol. Trans. ASME. 132(1), 0110071–0110075 (2010) 64. Baldi, A.: Combining hole-drilling and ring-core techniques. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 9, pp. 105–112 (2017) 65. Schajer, G.S., Rickert, T.J.: Incremental computation technique for residual stress calculations using the integral method. In: Conference Proceedings of the society for Experimental Mechanics Series, vol. 6, pp. 185–191 (2011) 66. Albertazzi, A., Viotti, M.R., Buschinelli, P., Hoffmann, A., Kapp, W.: Residual stress measurement and inner geometry inspection of pipelines by optical methods. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 8, pp. 1–12 (2011) 67. Albertazzi, A.G., Viotti, M.R., Kapp, W.A.: A robust achromatic dspi interferometer for measurement in polar coordinates. Tech. Mess. 78(11), 513–519 (2011) 68. Casavola, C., Pappalettere, C., Tursi, F.: Calibration of barkhausen noise for residual stress measurement. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 4, pp. 255–266 (2013) 69. De Paula Dias, A.R., Nunes, R.M., De Lima, T.R.S., Clarke, T.G.R.: Evaluation of the residual stress state of 42crmo4 steel sheets in a production line. Mater. Res. 19(1), 153–157 (2016) 70. Harrington, J.S., Schajer, G.S.: Measurement of structural stresses by hole-drilling and DIC. Exp. Mech. 57(4), 1–9 (2017) 71. Baldi, A., Bertolino, F.: A low-cost residual stress measuring instrument. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol 9, pp. 113–119 (2017) 72. Harrington, J., Schajer, G.S.: Measurement of structural stresses by hole-drilling and DIC. In: Conference Proceedings of the Society for Experimental Mechanics, vol. 4, pp. 87–96 (2017) 73. Baldi, A.: Sensitivity analysis of i-DIC approach for residual stress measurement in orthotropic materials. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 9, pp. 355–362 (2016)
RkJQdWJsaXNoZXIy MTMzNzEzMQ==