118 C. Casavola et al. 34. Casavola, C., Lamberti, L., Pappalettera, G., Pappalettere, C.: Application of contouring to dental reconstruction. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3, pp. 183–191 (2013) 35. Shi, Z., Lin, J.: Method for 3D profilometry measurement based on contouring moire fringes. Proceedings of SPIE 7723, article number 672302 (2007) 36. Casavola, C., Pappalettera, G., Pappalettere, C.: Design of a fiber optics fringe projector for 3D reconstruction of dental elements. 3rd Mediterranean Photonics Conference, article number 5866487 (2014) 37. Miao, H., Quan, C., Tay, C.J., Wu, X.P.: Profilometry using optical edge projection. Proc. SPIE. 5852, 169–174 (2004) 38. Broggiato, G.B., Campana, F., Gerbino, S., Martorelli, M.: Confronto tra Diverse Tecniche di Digitalizzazione delle Forme per il Reverse Engineering, INGEGRAF, pp. 1–11 (2002) 39. Sitnik, R.: A fully automatic 3D shape measurement system with data export for engineering and multimedia systems. A Dissertation Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy in the Warsaw University of Technology Warsaw (2002) 40. Norouzi, S., Eslami, F., Wyszynski, M.L., Tsolakis, A.: Corrosion effects of RME in blends with ULSD on aluminum and copper. Fuel Process. Technol. 104, 204–210 (2012) 41. Bogrekci, I., Durakbasa, N., Demircioglu, P.: Comparison between 3D digital and optical microscopes for the surface measurement using image processing techniques. Automatisierungstechnik. 61(3), 195–202 (2013) 42. Spagnolo, G.S., Guattari, G., Sapia, C., Ambrosini, D., Paoletti, D., Accardo, G.: Contouring of artwork surface by fringe projection and FFT analysis. Opt. Lasers Eng. 33, 141–156 (2000) 43. Bernardi, E., Chiavari, C., Martini, C., Morselli, L.: The atmospheric corrosion of quaternary bronzes: an evaluation of the dissolution rate of the alloying elements. Appl. Phys. A. 92(1), 83–89 (2008)
RkJQdWJsaXNoZXIy MTMzNzEzMQ==