18 Feasibility of Using Fringe Projection System for Corrosion Monitoring in Metals of Interest in Cultural Heritage 117 References 1. Arbace, L., Sonnino, L., Callieri, M., Dellepiane, M., Fabbri, M., Iaccarino Idelson, A., Scopigno, R.: Innovative uses of 3D digital technologies to assist the resoration of a fragmented terracotta statue. J. Cult. Herit. 14(4), 332–345 (2013) 2. Fantini, M., de Crescenzio, F., Persiani, F., Benazzi, S., Gruppioni, G.: 3D restitution, restoration and prototyping of a medieval damaged skull. Rapid Prototyp. J. 14(5), 318–324 (2008) 3. Pieraccini, M., Guidi, G., Atzeni, C.: 3D digitizing of cultural heritage. J. Cult. Herit. 2(1), 63–70 (2001) 4. Casavola, C., Cazzato, A., Moramarco, V., Pappalettere, C.: Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory. Mater. Des. 90, 453–458 (2016) 5. Chen, Y., Liu, C., Zhou, J., Wang, X.: Multiaxial fatigue behaviors of 2024-T4 aluminium alloy under different corrosion conditions. Int. J. Fatigue. 98, 269–278 (2017) 6. Casavola, C., Lamberti, L., Pappalettere, C., Tattoli, F.: A comprehensive numerical stress - strain analysis of laser beam butt-welded titanium compared with austenitic steel joints. J. Strain Anal. Eng. Des. 45(7), 535–554 (2010) 7. Kashani, M.M., Crewe, A.J., Alexander, N.A.: Structural capacity assessment of corroded RC bridge piers. Proceedings of the Institution of Civil Engineers: Bridge Engineering. 170(1), 28–41 (2017) 8. Casavola, C., Pappalettere, C.: Discussion on local approaches for the fatigue design of welded joints. Int. J. Fatigue. 31(1), 41–49 (2009) 9. Wei, Z.: Characterization of materials for exhaust systems under combined mechanical and corrosive environment. SAE Technical Paper 9 (2013) 10. Casavola, C., S. Campanelli, L., Pappalettere, C.: Experimental analysis of residual stresses in the selective laser melting process. Society for Experimental Mechanics – 11th International Congress and Exhibition on Experimental and Applied Mechanics, 3, pp. 1479–1486 (2008) 11. Guérin, M., Alexies, J., Andrieu, E., Blanc, C., Odemer, G.: Corrosion-fatigue lifetime of Aluminium-copper-Lithium alloy 2050 in chloride solution. Mater. Des. 87, 681–692 (2015) 12. Casavola, C., Pappalettere, C.: Application of WEL.FA.RE. method on aluminum alloy welded joints. In: Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, pp. 1555–1562 (2005) 13. Gaddi, R, Cusano, M, Bonanni, P, Cacace, C, Giovagnoli, A: Degrado dei Monumenti e Inquinamento Atmosferico: Studio dei Processi di Annerimento, Erosione e Corrosione sui Materiali Costituenti i Beni Culturali di Roma, Ambiente e Beni Culturali in Collaborazione con ISPRA-ISCR (2015) 14. Poteras¸, G., Moncea, M.A., Panait, A.M.: Researches regarding marine environment corrosion on coastal structures. Turk. J. Fish. Aquat. Sci. 14, 965–971 (2014) 15. Dean, S.W., Delgadillo, G.H.D., Bushman, J.B.: Marine corrosion in tropical environments. Am. Soc. Test. Mater. 75–97 (2000) 16. Gianni, L., Cavallini, M., Natali, S., Adriaens, A.: Wet and dry accelerated aging tests in a spray chamber to understand the effects of acid rain frequencies on bronze corrosion. Int. J. Electrochem. Sci. 8, 1822–1838 (2013) 17. Ghoniem, M.: The characterization of a corroded Egyptian bronze statue and a study of the degradation phenomena. Int. J. Conserv. Sci. 2, 95–108 (2011) 18. Chiavari, C., Bernardi, E., Ospitali, F., Robbiola, L., Martini, C., Morselli, L.: La Corrosione Atmosferica dei Monumenti in Bronzo: Prove di Invecchiamento Artificiale, La Metallurgia Italiana, pp. 45–54 (2009) 19. Corbellini, S., Ferraris, F., Neri, A., Parvis, M., Angelini, E., Grassini, S.: Exposure-tolerant imaging solution for cultural heritage monitoring. IEEE Trans. Instrum. Meas. 60(5), 1691–1698 (2011) 20. Moreno Ortiz, F.T., Hernandes Zavaia, A., Gomez-Hernandez, A., Rodriguez Olivares, N.A.: Ultrasonic arc maps and its potential application in non-destructive testing. Conference Proceedings, pp. 111–116 (2017) 21. Cadelano, C., Bortolin, A., Ferrarini, G., Molina, B., Giantin, D., Zonta, P., Bison, P.: Corrosion detection in pipelines using infrared thermography: experiments and data processing methods. J. Nondestruct. Eval. 35(3), 49 (2016) 22. Casavola, C., Pappalettere, C., Tursi, F.: Calibration of barkhausen noise for residual stress measurement. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 4, pp. 255–266 (2013) 23. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Feasibility of local stress relaxation by laser annealing and x-ray measurement. Strain. 49(5), 393–398 (2013) 24. Huang, P.S., Jin, F., Chiang, F.P.: Quantitative evaluation of corrosion by a digital fringe projection technique. Opt. Lasers Eng. 31, 371–380 (1999) 25. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C., Tursi, F.: Drilling speed effects on accuracy of HD residual stress measurements. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 8, pp. 119–125 (2014) 26. McDonach, A., McKelvie, P., MacKenzie, P., Walker, C.A.: Improved Moiré interferometry and applications in fracture mechanics, residual stress and damaged composites. Exp. Tech. 7(6), 20–24 (1983) 27. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Mechanical characterization of SLM specimens with speckle interferometry and numerical optimization. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 6, pp. 837–843 (2011) 28. Hung, Y.Y., Ho, H.P.: Shearography: an optical measurement technique and applications. Mater. Sci. Eng. R. Rep. 49(3), 61–87 (2005) 29. Schajer, G.S., Steinzig, M.: Dual-axis hole-drilling ESPI residual stress measurements. J. Eng. Mater. Technol. Trans. ASME. 132(1), 0110071– 0110075 (2010) 30. Baldi, A.: Combining hole-drilling and ring-core techniques. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 9, pp. 105–112 (2017) 31. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Hybrid characterization of laminated wood with ESPI and optimization methods. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3, pp. 75–83 (2013) 32. Casavola, C., Pappalettera, G., Pappalettere, C.: Design of a Double-Illumination ESPI system for the measurement of very slow motions. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3, pp. 97–102 (2014) 33. Miao, H., Quan, C., Tay, C.J., Fu, Y., Wu, X.P.: Optical edge projection for surface contouring. Opt. Commun. 256, 16–23 (2005)
RkJQdWJsaXNoZXIy MTMzNzEzMQ==