17 A Short Survey on Residual Stress Measurements by HDM and ESPI 109 18. Casavola, C., Pappalettera, G., Pappalettere, C.: ESPI analysis of thermo-mechanical behavior of electronic components. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3,pp. 321–326 (2017) 19. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Innovative mechanical characterization of materials by combining ESPI and numerical modelling. Int. J. Mech. 10, 115–123 (2016) 20. Casavola, C., Pappalettera, G., Pappalettere, C.: Design of a double-illumination ESPI system for the measurement of very slow motions. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3, pp. 97–102 (2015) 21. Casavola, C., Lamberti, L., Moramarco, V., Pappalettera, G., Pappalettere, C.: Experimental analysis of thermo-mechanical behaviour of electronic components with speckle interferometry. Strain. 49(6), 497–506 (2013) 22. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Hybrid characterization of laminated wood with ESPI and optimization methods. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 3, pp. 75–83 (2013) 23. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Mechanical characterization of SLM specimens with speckle interferometry and numerical optimization. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 6, pp. 837–843 (2011) 24. Furgiuele, F.M., Pagnotta, L., Poggialini, A.: Measuring residual stresses by hole-drilling and coherent optics techniques: a numerical calibration. J. Eng. Mater. Technol. 113(1), 41–50 (1991) 25. Lin, S.T., Hsieh, C.T., Hu, C.P.: Two holographic blind-hole methods for measuring residual stresses. Exp. Mech. 34(2), 141–147 (1994) 26. Asundi, A., Zhang, J.: Industrial applications of residual stress determination using 2-D in-plane sensitive fibre ESPI and hole-drilling. Proceedings of SPIE, 3740, pp. 78–81 (1999) 27. Lira, I.H., Vial, C., Robinson, K.: The ESPI measurement of the residual stress distribution in chemically etched cold-rolled metallic sheets. Meas. Sci. Technol. 8(11), 150–157 (1997) 28. Albertazzi, A., Kanda, C., Borges, M.R., Hrebabetzk: A radial in-plane interferometet for ESPI measurement. In: Kujawinska, M., et al. (eds.) Laser Interferometry X: Technique and Analysis Proceedings of SPIE 4101, pp. 77–88 (2002) 29. Suterio, R., Albertazzi, A.G., Cavaco, M.A.M.: Preliminary evaluation: the indentation method combined with a radial interferometer for residual stress measurement. In: Proceedings of the SEM Annual Conference Charlotte (2003) 30. Steinzig, M., Ponslet, E.: Residual stress measurement using the hole drilling method and laser speckle interferometry: part 1. Exp. Tech. 27(3), 43–46 (2003) 31. Steinzig, M., Ponslet, E.: Residual stress measurement using the hole drilling method and laser speckle interferometry. Exp. Tech. 27(4), 17–21 (2003) 32. Ponslet, E., Steinzig, M.: Residual stress measurement using the hole drilling method and laser speckle interferometry part III: Analysis. Exp. Tech. 27(5), 45–48 (2003) 33. Steinzig, M., Takahashi, T.: Residual stress measurement using the hole drilling method and laser speckle interferometry part IV: Measurement accuracy. Exp. Tech. 27(3), 59–63 (2003) 34. Casavola, C., Pappalettera, G., Pappalettere, C., Tursi, F.: Analysis of the effects of strain measurement errors on residual stresses measured by incremental hole-drilling method. J. Strain Anal. Eng. Des. 48(5), 313–320 (2013) 35. Rickert, T.J., Gubbels, W.: ESPI hole-drilling of rings and holes using cylindrical hole analysis. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 9, pp. 83–89 (2017) 36. Rickert, T.: Stress measurement repeatability in ESPI hole-drilling. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 9, pp. 363–369 (2016) 37. Steinzig, M., Upshaw, D., Rasty, J.: Influence of drilling parameters on the accuracy of hole-drilling residual stress measurements. Exp. Mech. 54(9), 1537–1543 (2014) 38. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Analysis of the effects of process parameters in residual stress measurements on titanium plates by HDM/ESPI. Measurement. 48, 220–227 (2014) 39. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Residual stress measurements by ESPI-HDM in titanium grade 5: comparative measurements with different hole diameters. Ciencia e Tecnologia dos Materiais. 27(2), 79–93 (2015) 40. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Considerations on the choice of experimental parameters in residual stress measurements by hole-drilling and ESPI. Frattura ed Integrità Strutturale. 30, 211–219 (2014) 41. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C., Tursi, F.: Drilling speed effects on accuracy of HD residual stress measurements. In: Conference Proceedings of the Society for Experimental Mechanics Series, vol. 8, pp. 119–125 (2013) 42. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Consideration on temperature fields and internal radius of analysis in hdmCespi residual stress measurement. 13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics, pp. 11–14 (2014) 43. Barile, C., Casavola, C., Pappalettere, C., Pappalettera, G.: Experimental and Numerical Characterization of sintered materials with speckle interferometry and optimization methods. 10th IMEKO TC12 Youth Symposium on Experimental Solid Mechanics, pp. 35–36 (2012) 44. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Remarks on residual stress measurement by hole-drilling and electronic speckle pattern interferometry. Sci. World J. 2014, 1–7 (2014) 45. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Overview of the effects of process parameters on the accuracy in residual stress measurements by using HD and ESPI. In: Conference Proceedings of the Society for Experimental Mechanics Series – Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, vol. 9, pp. 113–118 (2016) 46. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Residual stress measurement by electronic speckle pattern interferometry; a study of the influence of geometrical parameters. Struct. Integr. Life. 17(3), 177–182 (2011) 47. Barile, C., Casavola, C., Pappalettera, G., Pappalettere, C.: Residual stress measurement by electronic speckle patterni interferometry; a study of the influence of analysis parameters. Struct. Integr. Life. 12(3), 159–163 (2012) 48. Baldi, A., Jacquot, P.: Residual stressed investigations in composite samples by speckle interferometry and specimen repositioning. Proceedings SPIE. Speckle Metrol. 4933, 141–148 (2003) 49. Baldi, A.: A new analytical approach for hole drilling residual stress analysis by full field method. J. Eng. Mater. Technol. 127, 165–169 (2005)
RkJQdWJsaXNoZXIy MTMzNzEzMQ==