7. Selvakumar, N., Gangatharan, K.: Research article, electrical resistivity, tribological behaviour of multiwall carbon nanotubes and nano boron carbide particles reinforced copper hybrid composites for pantograph application. Adv. Mater. Sci. Eng. 2016, 1–18 (2016) 8. Casstevens, J.M.: Friction and wear characteristics of power metallurgy copper–graphite brushes at high sliding speeds. Wear. 49, 169–178 (1978) 9. Zhao, H., Barber, G.C., Liu, J.: Friction and wear in high speed sliding with and without electrical current. Wear. 249, 409–914 (2001) 10. Lhmn, C.: Tribological properties of unidirectional poly – Phenylene sulfide-carbon fiber laminated composites. Wear. 107, 147–159 (1987) 11. Groth, K., Heidenfelder, F., Holinski, R.: Advancements of tribological performance of carbon brushes in electrical motors. Industrial Lubrication Tribology. 53(1), 5–9 (2001) 12. Esezobor, D., Oladoye, A.: Improvementon the tribological characteristics of particulate copper silicon carbide composites, TMS – EPD, Congress pp. 827–834, 2011 13. Vettivel, S.C., Selvakumar, N., Leema, N., Lenin, A.H.: Electrical resistivity, wear map and modeling of extruded tungsten reinforced copper composite. Mater. Des. 56, 791–806 (2014) 14. Kaya, H.: Dependence of electrical resistivity on temperature and composition of Al–Cu alloys. Mater. Res. Innov. 16(3), 224–229 (2012) 15. Lim, S.C., Gupta, M., Ren, L., Kok, J.K.M.: Tribological properties of Al-Cu/SiCp metal matrix composites fabricated using the rheo-casting technique. J. Mater. Process. Technol. 89–90, 591–596 (1999) 110 F. Gatamorta et al.
RkJQdWJsaXNoZXIy MTMzNzEzMQ==