On the basis of practical experiments, the following optimum parameters for these composites: sintering temperature at 950 C with a holding time maximum 1 h and tempering process should be made at 490 C for 2 h for eliminating the porosity and increasing strength of these composites. Addition of TiC, as the reinforcement element, should be around 10–15wt%. References 1. Veasey, T.J., Wilson, R.J., Squires, D.M.: The physical separation and recovery of metals from wastes: process engineering for the chemical, metals and minerals industries, vol. 1. Gordon and Breach, Amsterdam (1993) 2. Skalova, L., Luka, J.: Optimization of recycling process of white bronze chips. 12th International Research/Expert Conference–TMT 2008, Turkey, Istanbul, August 2008, ISBN: 995861741-2 3. Gronostajski, J., Gronostajski, Z.: Sintering criterion in metal working processes. J. Mater. Process. Technol. 133, 99–102 (2003) 4. van der Heide, E., Stama, E.D., Giraud, H., Lovato, G., Akdut, N., Clarysse, F., Caenen, P., Heikill, I.: Wear of aluminium bronze in sliding contact with lubricated stainless steel sheet material. Wear 261, 68–73 (2006) 5. Pawlak, Z., Kaldonski, T., Pai, R., Bayraktar, E., Oloyede, A.: A comparative study on the tribological behaviour of hexagonal boron nitride (h-BN) as lubricating micro-particles: an additive in porous sliding bearings for a car clutch. Wear 267(5–8), 1198–1202 (2009) 6. Lu, H., Wang, X., Zang, T., Cheng, Z., Feng, Q.: Design, fabrication, and properties of high damping metal matrix composites, a review. J.Mater. 2, 958–977 (2009) 7. Bayraktar, E., Ayari, F., Tan, M.J., Tosun Bayraktar, A., Katundi, D.: Manufacturing of aluminum matrix composites reinforced with ironoxide nanoparticles: microstructural and mechanical properties. In: Laughlin, D.E. (ed.) Metallurgical and Materials Transactions B, vol. 45, pp. 352–362. Springer, New York (2014) 8. Chmura, W., Gronostajski, Z.: Bearing composites made from aluminium and aluminium bronze chips. J. Mater. Process. Technol. 178, 188–193 (2006) 9. Ferreira, L.-M.-P., Bayraktar, E., Robert, M.-H., Miskioglu, I.: Optimization of magnetic and electrical properties of new aluminium matrix composite reinforced with magnetic nano iron oxide. In: Zimmerman, K.B. (ed.) Mechanics of Composite and Multifunctional Materials, vol. 7, pp. 11–18. Springer, New York (2015). ISBN: 978-3-319-21761-1 10. Bayraktar, E., Robert, M.-H., Miskioglu, I.: Design of Al-Nb2Al composites through powder metallurgy. In: Zimmerman, K.B. (ed.) Mechanics of Composite and Multifunctional Materials, vol. 7, pp. 131–139. Springer, New York (2015). ISBN: 978-3-319-21761-1 11. Lu, H., Wang, X., Zhang, T., Cheng, Z., Fang, Q.: Design, fabrication, and properties of high damping metal, matrix composites—a review. Materials 2, 958–977 (2009). doi:10.3390/ma2030958 138 L.F.P. Ferreira et al.
RkJQdWJsaXNoZXIy MTMzNzEzMQ==