different nano-reinforcements, structural adhesives and fiber-reinforced sleeves needs to be performed to fully exploit the benefit offered by this robust joint. Nevertheless, the results shown in this work show great promise for use of these novel hybrid joints for a wide range of multi-material joining applications. Acknowledgements This work was supported by US Army under TACOM/MSU Cooperative Agreement No. W56HZV-07-2-0007. The authors also acknowledge the in-kind material contribution by Southern Clay Products Inc., TX. References 1. Jenney CL, O’Brien A (eds) (2001) Welding handbook: welding science and technology, 9th edn. American Welding Society, Doral 2. Sidhu M, Chatha S (2012) Friction stir welding—process and its variables: a review. Int J Emerg Technol Adv Eng 2(12):275–279 3. Matsuoka S, Imai H (2009) Direct welding of different metals used ultrasonic vibration. J Mater Process Technol 209(2):954–960 4. Fahimpour V, Sadrnezhaad S, Karimzadeh F (2012) Corrosion behavior of aluminum 6061 alloy joined by friction stir welding and gas tungsten arc welding methods. Mater Des 39:329–333 5. Yunlian Q, Ju D, Quan H, Liying Z (2000) Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet. Mater Sci Eng A 280(1):177–181 6. Tan H, Wang Z, Jiang Y, Han D, Hong J, Chen L, Jiang L, Li J (2011) Annealing temperature effect on the pitting corrosion resistance of plasma arc welded joints of duplex stainless steel UNS S32304 in 1.0M NaCl. Corros Sci 53(6):2191–2200 7. Findik F (2011) Recent developments in explosive welding. Mater Des 32(3):1081–1093 8. Lin S, Song J, Yang C, Fan C, Zhang D (2010) Brazability of dissimilar metals tungsten inert gas butt welding–brazing between aluminum alloy and stainless steel with Al Cu filler metal. Mater Des 31(5):2637–2642 9. Cloud GL (2013) 2012 William M. Murray lecture: some curious unresolved problems, speculations, and advances in mechanical fastening. Exp Mech 53(7):1073–1104 10. Lin W-H, Jen M-HR (1999) The strength of bolted and bonded single-lapped composite joints in tension. J Compos Mater 33(7):640–666 204 M. Haq et al.
RkJQdWJsaXNoZXIy MTMzNzEzMQ==