244 T. T. Mallareddy et al. Geometry – CAD Model Material parameters/Boundary conditions Results – Eigenfrequencies/modeshapes Results – Eigenfrequencies/modeshapes Boundary conditions Geometry Correlationand Validation Simulation Experimental 1 2 3 Fig. 23.6 The representation of the correlation of simulation and experimental results showing the influence of geometrical correlation Geometry – CAD Model Material parameters / Boundary conditions / Mesh Results – Eigenfrequencies/modeshapes Results – Eigenfrequencies/modeshapes Boundary conditions Geometry Validated Dynamic Model Simulation Experimental 1 2 3 Fig. 23.7 The representation of the correlation of simulation and experimental results for deriving a validated dynamic model References 1. Berman, A.: Inherently incomplete finite element model and its effects on model updating. AIAA J. 38(11), 2142–2146 (2000) 2. Blaschke, P., Schneider, T.: Reactionless test to identify dynamic Young’s modulus and damping of isotropic plastic materials. Topics Modal Anal. Proc. XXXI Int. Modal Anal. Conf. 7, 511–516 (2014)
RkJQdWJsaXNoZXIy MTMzNzEzMQ==