86 A. Javidialesaadi and N. Wierschem Frequency Ratio TMD RITMD Dynamic Magnification Factor (DMF) 0.4 0.6 0.8 1 1.2 1.4 1.6 0 1 2 3 4 5 Fig. 11.6 TMD vs RITMD Response; m1D10% ms (rotational mass D15%m1) References 1. Den Hartog, J.: Mechanical Vibrations, 4th edn. McGraw-Hill, New York (1956) 2. Liu, K., Liu, J.: The damped dynamic vibration absorbers: revisited and new result. J. Sound Vib. 284(3–5), 1181–1189 (2005) 3. Ozer, M.B., Royston, T.J.: Extending Den Hartog’s vibration absorber technique to multi-degree-of-freedom systems. J. Vib. Acoust. 127(4), 341 (2005) 4. Dayou, J.: Fixed-points theory for global vibration control using vibration neutralizer. J. Sound Vib. 292(3–5), 765–776 (2006) 5. Smith, M.C.: Synthesis of mechanical networks: the inerter. IEEE Trans. Autom. Control. 47(10), 1648–1662 (2002) 6. Hwang, J.-S., Kim, J., Kim, Y.-M.: Rotational inertia dampers with toggle bracing for vibration control of a building structure. Eng. Struct. 29(6), 1201–1208 (2007) 7. Ikago, K., Saito, K., Inoue, N.: Seismic control of single-degree-of-freedom structure using tuned viscous mass damper: the tuned viscous mass damper. Earthq. Eng. Struct. Dyn. 41(3), 453–474 (2012) 8. Hu, Y., Chen, M.Z.Q.: Performance evaluation for inerter-based dynamic vibration absorbers. Int. J. Mech. Sci. 99, 297–307 (2015) 9. Lazar, I.F., Neild, S.A., Wagg, D.J.: Using an inerter-based device for structural vibration suppression: using an inerter-based device for structural vibration suppression. Earthq. Eng. Struct. Dyn. 43(8), 1129–1147 (2014) 10. Garrido, H., Curadelli, O., Ambrosini, D.: Improvement of tuned mass damper by using rotational inertia through tuned viscous mass damper. Eng. Struct. 56, 2149–2153 (2013)
RkJQdWJsaXNoZXIy MTMzNzEzMQ==