30 Structural Stiffness Identification of Skewed Slab Bridges with Limited Information for Load Rating Purpose 249 Acknowledgments This material is based upon the work supported by the Virginia Department of Transportation. The authors would like to thank Dr. Bernard L. Kassner of Virginia Transportation Research Council for his helps in conducting the vibration testing of the bridge. References 1. Chajes, M., Shenton III, H., O’Shea, D.: Bridge-condition assessment and load rating using nondestructive evaluation methods. Transp. Res. Rec. J. Transp. Res. Board. 1696, 83–91 (2000) 2. Faber, M.H., Val, D.V., Stewart, M.G.: Proof load testing for bridge assessment and upgrading. Eng. Struct. 22(12), 1677–1689 (2000) 3. Cai, C.S., Shahawy, M.: Understanding capacity rating of bridges from load tests. Pract. Period. Struct. Des. Constr. 8(4), 209–216 (2003) 4. AASHTO: Manual for Bridge Evaluation, 2nd edn. with 2016 Interim Revisions. American Association of State Highway and Transportation Officials, Washington (2015) 5. VDOT: State of the Structures and Bridges Report. Virginia Department of Transportation, Richmond (2015) 6. Ma, Y., Wang, L., Zhang, J., Xiang, Y., Liu, Y.: Bridge remaining strength prediction integrated with Bayesian network and In situ load testing. J. Bridg. Eng. 19(10), 04014037 (2014) 7. Leissa, A.W.: Vibration of plates. National Aeronautics and Space Administration, NASA SP-160 (1969) 8. Bagheri, A., Rizzo, P., Al-Nazer, L.: Determination of the neutral temperature of slender beams by using nonlinear solitary waves. J. Eng. Mech. 141(6), 04014163 (2014) 9. Dragomiretskiy, K., Zosso, D.: Variational mode decomposition. IEEE Trans. Signal Process. 62(3), 531–544 (2014)
RkJQdWJsaXNoZXIy MTMzNzEzMQ==