69 5. Ageorges, C., Ye, L., Hou, M.: Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review. Compos. A: Appl. Sci. Manuf. 32(6), 839–857 (2001) 6. Ageorges, C., Ye, L.: Fusion Bonding of Polymer Composites: From Basic Mechanisms to Process Optimization. Springer, London (2002) 7. Friedrich, K., Almajid, A.A.: Manufacturing aspects of advanced polymer composites for automotive applications. Appl. Compos. Mater. 20(2), 107–128 (2013) 8. Stavrov, D., Bersee, H.E.N.: Resistance welding of thermoplastic composites—an overview. Compos. A: Appl. Sci. Manuf. 36(1), 39–54 (2005) 9. Ahmed, T.J., Stavrov, D., Bersee, H.E.N., Beukers, A.: Induction welding of thermoplastic composites—an overview. Compos. A: Appl. Sci. Manuf. 37(10), 1638–1651 (2006) 10. Benatar, A.: Ultrasonic welding of advanced thermoplastic composites. Doctoral dissertation, Massachusetts Institute of Technology (1987) 11. Bates, P., Couzens, D., Kendall, J.: Vibration welding of continuously reinforced thermoplastic composites. J. Thermoplast. Compos. Mater. 14(4), 344–354 (2001) 12. Stokes, V.K.: Joining methods for plastics and plastic composites: an overview. Polym. Eng. Sci. 29(19), 1310–1324 (1989) 13. Weber, A.: Welding Still Ensures High-Strength Joints (2007, November) 14. Troughton, M.J.: Handbook of Plastics Joining: A Practical Guide, 2nd edn. William Andrew, Norwich (2008) 15. The Welding Institute. “Ultrasonic welding of injection moulded components.” TWI. http://www.twiglobal.com/technical-knowledge/job knowledge/ultrasonic-welding-of-injection-moulded-components-part-1-process-and-equipment-061/. Accessed 21 Jul 2016. 16. Dukane Intelligent Assembly Solutions. “What is Ultrasonic Welding?” Dukane. http://www.dukane.com/us/PPL_whatisUPA.htm. Accessed 21 Jul 2016. 17. Ensinger Inc. “TECANAT GF20 glass filled PC.” Ensinger. Accessed 21 July 2016. http://www.ensingerinc.com/products.cfm?page=product &product=tecanat+gf20+glass+filled+pc. Accessed 21 Jul 2016. 18. Hart-Smith, L.: Adhesive-bonded single-lap joints. Technical Report NASA CR 112236 (1973) 19. Barlow, C., Kumar, V., Flinn, B., Bordia, R., Weller, J.: Impact strength of high density solid-state microcellular polycarbonate foams. J. Eng. Mater. Technol. 123, 229–233 (2001) 20. Goland, M., Reissner, E.: The stresses in cemented joints. J. Appl. Mech. 11, A17–A27 (1944) 21. Pace Technologies. “Metallographic Castable Mounting.” Pace Technologies. http://www.metallographic.com/Technical/Castable%20Mount. htm. Accessed 21 Jul 2016. 22. LeGrand, D.: Handbook of Polycarbonate Science and Technology. Marcel Dekker, New York (2000) 23. Davis, M.J., Bond, D.A.: The importance of failure mode identification in adhesive bonded aircraft structures and repairs. In: ICCM 12, Paris, France (1999) 24. Suzuki, K., Ohsawa, I., Uzawa, K., Nagata, K., Matsuo, T., Yamane, M., Takahashi, J. (2012): Joint Efficiency of Ultrasonic Welding of CFRTP (Carbon Fiber Reinforced Thermoplastics) for Structural Applications 25. Srinivasa, V., Shivakumar, V., Nayaka, V., Jagadeeshaiaih, S., Seethram, M., Shenoy, R., Nafidi, A.: Fracture morphology of carbon fiber reinforced plastic composite laminates. Mater. Res. 13(3), 417–424 (2010) 7 Impact and Lap Shear Properties of Ultrasonically Spot Welded Composite Lap Joints
RkJQdWJsaXNoZXIy MTMzNzEzMQ==