Optical Measurements, Modeling, and Metrology, Volume 5

Optical Measurements, Modeling, and Metrology, Volume 5	4
Preface	6
Contents	8
3D structures of alloys and nanoparticles observed by electron tomography	12
Damage characterization in Dual-Phase steels using X-ray tomography	21
In-situ synchrotron-radiation computed laminography observation ofductile fracture	29
Understanding the mechanical behaviour of a high manganese TWIP steelby the means of in situ 3D X ray tomography	36
Mechanical properties of Monofilament entangled materials	42
Characterisation of mechanical properties of cellular ceramic materials usingX-Ray computed tomography	48
Multiaxial stress state assessed by 3D X-Ray tomography on semi-crystallinepolymers	56
Effect of Porosity on the Fatigue Life of a Cast Al Alloy	64
Fatigue mechanisms of brazed Al-Mn alloys used in heat exchangers	71
Three Dimensional Confocal Microscopy Study of Boundaries between Colloidal Crystals	76
Scale Independent Fracture Mechanics	82
Consistent Embedding: A Theoretical Framework for Multiscale Modeling	89
Analysis of Crystal Rotation by Taylor Theory	97
Numerical Solution of the Walgraef-Aifantis Model for Simulation of Dislocation Dynamics in Materials Subjected to Cyclic Loading	103
Photoelastic Determination of Boundary Condition for Finite Element Analysis	114
Discussion on hybrid approach to determination of cell elastic properties	124
Mesh Refinement for Inverse Problems with Finite Element Models	130
Assessment of inverse procedures for the identification of hyperelastic material parameters	136
Digital image correlation through a rigid borescope	145
Scale Independent Approach to Strength Physics and Optical Interferometry	150
Optical Techniques That Measure Displacements: A Review of the Basic Principles	157
Studying phase transformation in a shape memory alloy with full-fieldmeasurement techniques	183
Correlation between Mechanical Strength and Surface Conditions of Laser AssistedMachined Silicon Nitride	189
Analysis of speckle photographs by subtracting phase functions of digitalFourier transforms	200
MEASUREMENT OF RESIDUAL STRESSES IN DIAMOND COATED SUBSTRATES UTILIZING COHERENT LIGHT PROJECTION MOIRÉ INTERFEROMETRY	209
Automatic Acquisition and Processing of Large Setsof Holographic Measurements in Medical Research	218
Adaptative reconstruction distance in a lensless Digital Holographic Otoscope	228
3D Shape Measurements with High-Speed Fringe Projection and Temporal Phase Unwrapping	234
Measuring Local Mechanical Properties of Membranes Applying Coherent Light Projection Moiré Interferometry	241
EXPERIMENTAL ANALYSIS OF FOAM SANDWICH PANELS WITH PROJECTION MOIRÉ	247
Panoramic stereo DIC-based strain measurement on submerged objects	255
Advances in the Measurement of Surfaces Properties Utilizing Illumination at Angles Beyond Total Reflection	262
Filters with Noise/Phase Jump Detection Scheme for Image Reconstruction	270
An Instantaneous Phase Shifting ESPI System for Dynamic Deformation Measurement	276
Development of Linear LED Device for Shape Measurement by Light Source Stepping Method	281
Calibration Method for Strain Measurement Using Multiple Cameras in DigitalHolography	289
Performance Assessment of Strain Measurement with an Ultra High Speed Camera	295
Rigid Body Correction Using 3D Digital Photogrammetry for Rotating Structures	303
Development of Sampling Moire Camera for Landslide Prediction by Small Displacement Measurement	318
Energy Dissipation in Impact Absorber	326
Mechanics behind 4D interferometric measurement of biofilm mediated tooth decay.	331
Validating Road Profile Reconstruction Methodology Using ANN Simulation onExperimental Data	339
Electro-optical Property of Sol-gel-derived PLZT7/30/70 Thin Films	352
DECOUPLING SIX EFFECTIVE PARAMETERS OF ANISOTROPIC OPTICAL MATERIALS USING STOKES POLARIMETRY	358
Measurement of Creep Deformation in Stainless Steel Welded Joints	364
Thermal Deformation Measurement in Thermoelectric Coolers by ESPI and DIC Method	372
Structural Health Monitoring Using Digital Speckle Photography	385
Determining the Strain Distribution in Bonded and Bolted/Bonded Composite Butt Joints Using the Digital Image Correlation Technique and Finite Element Methods	392
Improved spectral approach for continuous displacement measurementsfrom digital images	398
Experimental testing (2D DIC) and FE modeling of T-Stub Model.	405

RkJQdWJsaXNoZXIy MTMzNzEzMQ==