[2] Fung YC. Biomechanics. Mechanical Properties of Living Tissues. In: Springer, editor.; 1993. [3] Matsumoto T., Gotob T., Furukawaa T., Satob M. Residual stress and strain in the lamellar unit of the porcine aorta: experiment and analysis. J Biomech 2004; 37: 807-815. [4] Sicot O., Cherouat A., Gong X.L., and Lu J. Determination of residual stresses in composite laminates using the incremental hole-drilling method. J Compos Mater 2003; 27:575–598 [5] Ersoy N., Vardar O. Measurement of residual stresses in layered composites by compliance method. J Compos Mater 2000; 34:575–598. [6] Baldi A. Full field methods and residual stress analysis in orthotropic material. I. Linear approach. Int J Sol Struct 2007; 44(25–26):8229–8243. [7] Han HC, Fung YC. Species dependence of the zero stress state of aorta: pig versus rat. ASME J Biomech Eng 1991; 119:438:444. [8] Cardamone L, Valentin A, Eberth JF, Humphrey JD. Origin of axial prestretch and residual stress in arteries. Biomech Model Mechanobiol 2008. [9] Holzapfel GA, Sommer G, Auer M, Regitnig P, Ogden RW. Layer-specific 3D residual deformation of human aortas with non-atherosclerotic intimal thickening. Annals Biomed Eng 2007; 35(4):530-545. [10] Murugan M, Naranayan R. Finite element simulation of residual stresses and their measurement by contour method. Mat Design 2009; 30:2067-2071. [11] Prime MB. Residual stresses measured in quenched HSLA-100 steel plate. Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, paper #52. [12] Zhang W, Guo X, and Kassab GS. A Generalized Maxwell Model for Creep Behavior of Artery Opening Angle, J Biomech Eng 2008; 130(5): 054502. [13] Ohayon J, Dubreuil O, Tracqui P, Le Floc’h S, Rioufol G, Chalabreysse L, Thivolet F, Pettigrew RI, Finet G. Influence of residual stress/strain on the biomechanical stability of vulnerable coronary plaques: potential impact for evaluating the risk of plaque rupture. Am J Physiol Heart Circ Physiol 2007;293(3):H1987-96. [14] Sutton MA, Orteu J-J, Schreier H, Image Correlation for Shape, Motion and Deformation Measurements, Springer, 2009. [15] Faugeras OD, Three-Dimensional Computer Vision: A geometric Viewpoint, MIT Press, 1993. [16] Hatze H, High precision three-dimensional photogrammetric calibration and object space reconstruction using a modified DLT-approach, J Biomech, 21, 533-538, 1988. [17] Cox RH, Passive mechanics and connective tissue composition of canine arteries, Am J Physiol, 234, H533-41, 1978. [18] Dobrin PB, Mechanical properties of arteries, Physiol Rev, 58, 397-460, 1978. [19] Armentano RL, Barra JG, Levenson J, Simon A, Pichel RH, Arterial wall mechanics in conscious dogs. Circ res, 76, 468-478, 1995. [20] Thubrikar MJ, Labrosse M, Robicsek M, Al-Soudi J, Fowler B, Mechanical properties of abdominal aortic aneurysm wall, J med Eng Tech, 25, 133 – 142, 2001. [21] Vorp DA, Biomechanics of abdominal aortic aneurysm, J Biomech, 40, 1887–1902, 2007. [22] Carew TE, Vaishnav RN, Patel DJ, Compressibility of the arterial wall, Circ. Res, 23, 61-68, 1968. 40
RkJQdWJsaXNoZXIy MTMzNzEzMQ==