nostics. Results show that the model-based diagnostics can be an effective tool in detecting incipient faults of induction motors, gears, turbines, and etc. References [1] Isermann, R.: Process Fault Detection Based on Modeling and Estimation Methods—A Survey. Automatica. 20, 387– 404 (1984) [2] Isermann, R.: Fault-Diagnosis Systems. Springer, Berlin, Germany (2006) [3] El Hachemi Benbouzid, M.: A Review of Induction Motors Signature Analysis as a Medium for Faults Detection. IEEE Trans. Ind. Electron., 47, 984–993 (2000) [4] Frank, P. M.: Fault Diagnosis in Dynamic Systems Using Analytical and Knowledge-Based Redundancy-A Survey and Some New Results. Automatica, 26, 459-474 (1990) [5] Shannon, C. E.: Communication in the presence of noise. Proc. of the IEEE, 72, 1192-1201 (1954) [6] Kim, J.: Bond Graph Models of a Squirrel-Cage Induction Motor and a Layshaft Gearbox for Degradation Analysis. M.S. thesis, The University of Texas—Austin, Austin, TX (1999) [7] Kim, J., and Bryant, M. D.: Bond Graph Model of a Squirrel Cage Induction Motor with Direct Physical Correspondence. ASME J. Dyn. Syst.,Meas., Control, 122, 461–469 (2001) [8] Haykin, S. (ed.): Kalman Filtering and Neural Networks. John Wiley & Sons, Inc., NY (2001) [9] Li, P. Goodall, R. and Kadirkamanathan, V.: Estimation of Parameters in a Linear State Space Model using a RaoBlackwellised Particle Filter. Proc. of Control Theory Appl., 151, 727-738 (2004) [10] de Freitas, N.: Rao-Blackwellised particle filtering for fault diagnosis. Proc. of Aerospace Conf. 4, 767-1772 (2002). [11] Ljung, L.: System Identification: Theory for Users. Prentice Hall, Upper Saddle River, NJ (1999) [12] Tapley B. D., Schutz, B. E. and Born, G. H.: Statistical Orbit Determination. Elservier Academic Press, Burlington, MA (2004) [13] Ansuj, S., Shokooh, F., and Schinzinger, R.: Parameter estimation for induction machines based on sensitivity analysis. Ind. Appl., 25, 1035-1040 (1989) [14] Said, M. S. N., Benbouzid, M. E. H., and Benchaib, A.: Detection of broken bars in induction motors using an extended Kalman filter for rotor resistance sensorless estimation. Energy Conv., 15, 66-70 (2000) [15] Gelb, A.(ed.): Applied Optimal Estimation. MIT Press, Cambridge MA (1974) [16] Bryant, M. D.: Application of Shannon’s Communication Theory to Degradation Assessment of Systems. Proc. ASME Congress, New York, 72, 1192–1201 (1998) [17] Lee, S., Bryant, M. D. and Karlapalem, L.: Model-and Information Theory-Based Diagnostic Method for Induction Motors. J. Dyn. Sys., Meas., and Control, 128, 584-591 (2006) Appendix 1: Transformation Matrices Transformation matrices ms and mr are the moduli of transformers from the stator phases to the α-β phases, and from the rotor phases to the α-β phases, respectively. r is the modulus of transformation from the electrical to the mechanical domain. The diagonal matrices ns and nr are the transformation moduli from the electrical to the magnetic domains. The diagonal entries are the numbers of turns of stator windings in the natural frame and rotor windings in α-β reference frame. ⎥ ⎦ ⎤ ⎢ ⎣ ⎡ = sin(0) sin (2 3) sin (4 3) cos(0) cos (2 3) cos (4 3) 3 2 π π π π sm 448
RkJQdWJsaXNoZXIy MTMzNzEzMQ==