Based on this work, the modal control technique is seen as a potential and attractive method for controlling human induced vibrations in civil engineering floor structures. As previously noted by some researchers, its benefit is that civil engineering designers can now evaluate frequency response functions of floors, detect a troublesome mode or groups of modes and design a modal control strategy to adjust the closed loop behaviour in some suitable way. The effects of the controller designer on other modes can also be evaluated to determine its robustness. 6 ACKNOWLEDGEMENT The authors would like to acknowledge the financial assistance provided by the UK Engineering and Physical Sciences Research Council (EPSRC) through a responsive mode grant entitled “Active Control of Human-Induced Vibration” (Ref: EP/H009825/1). REFERENCES Bachmann, H. (1992) Case Studies of Structures with Man-Induced Vibrations, Journal of Structural Engineering, 118(3). Bachmann, H. and Weber, B. (1995) Tuned Vibration Absorbers for Lively Structures, Structural Engineering International 1/95, Science and Technology, 31–36. Daley, S., Johnson, F.A., Pearson, J.B. and Dixon, R. (2004) Active Vibration Control for Marine Applications, Control Engineering Practice 12, 465 – 474. Diaz, I.M., and Reynolds, P. (2009) Robust Saturated Control of Human-Induced Floor Vibrations via a Proof-Mass Actuator, Smart Materials and Structures 18, 1 – 10. Diaz, I.M., and Reynolds, P. (2010) Acceleration Feedback Control of Human-Induced Floor Vibrations, Engineering Structures 32, 163-173. Fang, J Q , Li, Q S and Jeary A P (2003) Modified independent modal space control of m.d.o.f systems, Journal of Sound and Vibration 261, pp 421 – 441. Hanagan, L.M., Kulasekere, E.C., Walgama, K.S., and Premaratne, K. (2000) Optimal Placement of Actuators and Sensors for Floor Vibration Control, Journal of Structural Engineering, 126(12), 1380–1387. Hanagan, L.M., Murray, T.M., and Premaratne, K. (2003a) Controlling Floor Vibration with Active and Passive Devices, The Shock and Vibration Digest, 35(5), 347–365. Hanagan, L.M., Raebel, C.H., and Trethewey, M.W. (2003b) Dynamic Measurements of In-Place Steel Floors to Assess Vibration Performance, Journal of Performance of Constructed Facilities, 17(3), 126–135. Inman, D.J. (2001) Active Modal Control for Smart Structures, Phil. Trans. Royal Society London A 359, 205 – 219. ISO 2631:1997 Mechanical vibration and shock evaluation of human exposure to whole body vibration. Koo, J.H., Ahmadian, M., Setareh, M., and Murray, T.M. (2004) In Search of Suitable Control Methods for Semi-Active Tuned Vibration Absorbers, Journal of Vibration and Control, 10(2), 163–174. Nguyen, C C (1991) Implementation of Actuators for the Independent Modal Space Control Scheme, Computers Elec. Engng Vol. 17, No. 2, pp. 75-90. Nyawako D. and Reynolds P. (2007) Technologies for mitigation of human-induced vibrations in civil engineering structures, The Shock and Vibration Digest, 39 (6), 465-493. Nyawako, D. and Reynolds, P. (2009) Response-dependent velocity feedback control for mitigation of human-induced floor vibrations, Smart Materials and Structures 18, 1 – 14. Reynolds P. (2000) The effects of raised access flooring on the vibrational performance of long-span concrete floors PhD Thesis, University of Sheffield, UK, February 2000. Setareh, M. (2002) Floor Vibration Control using Semi-Active Tuned Mass Dampers, Canadian Journal of Civil Engineering, 29, 76–84. Seto, K. and Mitsuta, S. (1992) A new method for making a reduced order model flexible structures using unobservability and uncontrollability and its application in vibration control, In: Proc. 1st Int. Conf. Motion and Vibration Control (MOVIC), 152–158. 222
RkJQdWJsaXNoZXIy MTMzNzEzMQ==