viii 10 Feature Extraction for Structural Dynamics Model Validation 153 University of Sheffield; G. Park, Los Alamos National Laboratory; N. Takeda, 11 Hybrid Sets of Merged Data for Modal Model Applications 165 L. Thibault, B. LeBlanc, P. Avitabile, University of Massachusetts Lowell 12 Dynamic Uncoupling of a System Model for Component Identification 173 D. Cloutier, P. Avitabile, University of Massachusetts Lowell 13 Full Field Dynamic Stress/Strain From Limited Sets of Measured Data 187 P. Pingle, P. Avitabile, University of Massachusetts Lowell 14 Limited Experimental Displacement Data Used for obtaining Full-field Dynamic Stress Strain Information 201 P. Pingle, P. Avitabile, University of Massachusetts Lowell 15 A Survey of Techniques to Estimate the Uncertainty in Material Parameters 219 T. Simmermacher, Sandia National Laboratories 16 Construction of DEM-base Traffic Model Using Optimal Velocity Model 231 T. Koizumi, N. Tsujiuchi, R. Akatsuka, Doshisha University 17 Confidence Intervals of Modal Parameters During Progressive Damage Test 237 L. Mevel, INRIA; W. Rücker, BAM Federal Institute for Material Research and Testing 18 Identification of Material Properties of Composite Plates Utilizing Model Updating and Response Surface Techniques 251 K. Gurses, B. Kuran, C. Gencoglu, Roketsan A.S. 19 Globally Enriched Substructuring Techniques for Vibro-acoustic Simulation 263 U. Tabak, D.J. Rixen, Delft University of Technology 20 A Modal-geometrical Selection Criterion for Master Nodes: Numerical and Experimental Testing 281 E. Bonisoli, C. Delprete, C. Rosso, Politecnico di Torino 21 Robust Optimization and Quality Control in Spot Welded Structures 297 Q.I. Bhatti, M. Ouisse, S. Cogan, Université de Franche-Comté 22 Interface Reduction in the Dual Craig-Bampton Method Based on Dual Interface Modes 311 D.J. Rixen, Delft University of Technology 23 A Truly Hybrid Approach to Substructuring Problems Using Mixed Assembly and Implicit Solving Strategies 329 S.N. Voormeeren, P.L.C. van der Valk, D.J. Rixen, Delft University of Technology M. Nishio, University of Tokyo; F. Hemez, Los Alamos National Laboratory; K. Worden, University of Tokyo; C. Farrar, Los Alamos National Laboratory M. Döhler, INRIA; F. Hille, BAM Federal Institute for Material Research and Testing; X.-B. Lam,
RkJQdWJsaXNoZXIy MTMzNzEzMQ==