[19] Blelloch, P.(SDRC, United States), “Calculation of structural dynamic forces and stresses using mode acceleration”, Journal of Guidance, Control, and Dynamics, v 12, n 5, p 760-762, Sep-Oct 1989 [20] Powell, C., “Experimental Modal Analysis with Structural Modification Applied to System Stress Prediction”, Proceedings of the International Modal Analysis Conference & Exhibit, p 417, 1982 [21] Mahri, Z., Rouabah, M., “Calculation of dynamic stresses using finite element method and prediction of fatigue failure for wind turbine rotor”, WSEAS Transactions on Applied and Theoretical Mechanics, v 3, n 1, p 28-41, January 2008 [22] Guyan, R.J., "Reduction of Stiffness and Mass Matrices", AIAA Journal, Vol. 3, No 2, 1965 [23] Paz, M, "Dynamic Condensation", AIAA Journal, Vol22, No 5, May 1984 [24] O'Callahan,J.C., Avitabile,P., Riemer,R., "System Equivalent Reduction Expansion Process", Seventh International Modal Analysis Conference, Las Vegas, Nevada, February 1989 [25] Kammer, DC, "A Hybrid Approach to Test Analysis Model Development for Large Space Structures", Journal of Vibration and Acoustics, Vol 113, July 1991 [26] Allemang,R.J. and Brown,D.L., "A Correlation Coefficient for Modal Vector Analysis", First International Modal Analysis Conference, Orlando, Florida, November 1982, pp. 110-116 [27] Van Zandt, T., “Development of Efficient Reduced Models for Multi-Body Dynamics Simulations of Helicopter Wing Missile Configurations,” Master’s Thesis, University of Massachusetts Lowell, April 2006. [28] Avitabile,P., Piergentili,F., Lown,K., “Identifying Dynamic Loadings from Measured Response”, Sound & Vibration, August 1999 [29] P.Pingle, P.Avitabile, “Comparison of 3D laser Vibrometer and Accelerometer Frequency Measurements”, Proceedings of the Twenty-Seventh International Modal Analysis Conference, Orlando, FL, Feb 2009 [30] Butland, A., “A Hybrid Component Model Synthesis Approach for System Modeling Applications”, Master’s Thesis, University of Massachusetts Lowell, 2008. [31] Pingle, P., “Prediction of Full-Field Dynamic Stress-Strain from Limited Sets of Measured Displacement Data”, PhD. Thesis (submitted), University of Massachusetts Lowell, 2010. [32] MATLAB R2008b – The MathWorks, Natick, Massachusetts [33] Femap – Finite Element Modeling And Postprocessing, Version 9.3.1, Copyright © 2007 UGS Corp. [34] ARAMIS, v. 6.0 User’s Manual, GOM mbH, Braunschweig, Germany, 2007 [35] PONTOS, User’s Manual, Revision A, GOM mbH, Braunschweig, Germany (2004) [36] FEMtools 3.0 – Dynamic Design Solutions, Leuven, Belgium [37] ABAQUS 6.5.1 © Dassault Systèmes, 2004 217
RkJQdWJsaXNoZXIy MTMzNzEzMQ==