[5] T. K. Hasselman, R. N. Coppolino, and D. C. Zimmerman, "Criteria for Modeling Accuracy: A State-of-the-Practice Survey," presented at 18th International Modal Analysis Conference, San Antonio, TX, 2000. [6] NASA, "NASA-STD-5002, Loads Analyses of Spacecraft and Payloads," NASA June, 1996. [7] DoD, "DoD Handbook-340A (USAF), Test Requirements for Launch, Upper Stage, and Space Vehicles, Volume II: Applications and Guidelines," April, 1999. [8] R. Rebba, S. Huang, Y. Liu, and S. Mahadevan, "Statistical Validation of Simulation Models," Int. J. Materials and Product Technology, vol. 25, pp. 164-181, 2006. [9] F. M. Hemez, A. C. Rutherford, and R. D. Maupin, "Uncertainty Analysis of Test Data Shock Responses," presented at 24th International Modal Analysis Conference, Saint Louis, MO, 2006. [10] M. Basseville and A. Benveniste, "Handling Uncertainties in Identification and Model Validation: A Statistical Approach," presented at 24th International Modal Analysis Conference, Saint Louis, MO, 2006. [11] E. J. Bergman, M. S. Allen, D. C. Kammer, and R. L. Mayes, "Probalistic Investigation of Sensitivities of Advanced Test-Analysis Model Correlation Methods," presented at 26th International Modal Analysis Conference, Orlando, FL, 2008. [12] T. K. Hasselman and J. D. Chrowstowski, "Propagation of Modeling Uncertainty Through Structural Dynamic Models," presented at 35th Structures, Structural Dynamics, and Materials Conference, Hilton Head, SC, 1994. [13] T. Hasselman and G. Wathugala, "Top-Down vs. Bottom-Up Uncertainty Quantification for Validation of a Mechanical Joint Model," presented at 23rd International Modal Analysis Conference, Orlando, FL, 2005. [14] T. Hasselman, "Uncertainty Quantification in Verification and Validation of Computational Solid Mechanics Models - Modeling," presented at 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, 2009. [15] L. Hinke, B. R. Mace, and N. S. Ferguson, "Uncertainty Quantification and CMS: Free and Fixed-Interface Methodologies," presented at 25th International Modal Analysis Conference, Orlando, FL, 2007. [16] R. R. Craig and M. C. C. Bampton, "Coupling of Substructures for Dynamic Analysis," AIAA Journal, vol. 6, pp. 1313-1319, 1968. [17] B. R. Mace and P. J. Shorter, "A local Modal/Perturbational Method for Estimating Frequency Response Statistics of Built-Up Structures with Uncertain Properties," Journal of Sound and Vibration, vol. 242, pp. 793-811, 2001. [18] D. de Klerk and Voormeeren, "Uncertainty Propagation in Experimental Dynamic Substructuring," presented at 26th International Modal Analysis Conference, Orlando, FL, 2008. [19] D. de Klerk, D. J. Rixen, and J. de Jong, "The Frequency Based Substructuring (FBS) Method reformulated according to the Dual Domain Decomposition Method," presented at 24th International Modal Analysis Conference, St. Louis, MO, 2006. [20] S. N. Voormeeren and D. J. Rixen, "Substructure Decoupling Techniques - a Review and Uncertainty Propagation Analysis," presented at 27th International Modal Analysis Conference, Orlando, FL, 2009. [21] D. C. Kammer and S. Nimityongskul, "Propagation of Uncertainty in Test-Analysis Correlation of Substructured Spacecraft," presented at 28th International Modal Analysis Conference, Jacksonville, FL, 2010. [22] D. C. Kammer, "Test-Analysis Model Development Using an Exact Modal Reduction," International Journal of Analytical and Experimental Modal Analysis, vol. 2, pp. 174-179, 1987. [23] M. S. Allen and M. W. Sracic, "Mass Normalized Mode Shapes Using Impact Excitation and Continuous-Scan Laser Doppler Vibrometry," presented at 8th International Conference on Vibration Measurements by Laser Techniques, Ancona, Italy, 2008. [24] T. N. E. Greville and A. Ben-Israel, Generalized Inverses: Theory and Applications. New York: Wiley, 1974. [25] W. H. Steeb, Matrix Calculus and Kronecker Product with Applications and C++ Programs. Singapore: World Scientific, 1997. [26] J. R. Magnus and H. Neudecker, Matrix Differential Calculus with Applications in Statistics and Econometrics: John Wiley & Sons, 1988. [27] C. Soize, "Maximum Entropy Approach for Modeling Random Uncertainties in Transient Elastodynamics," Journal of the Acoustic Society of America, vol. 109, pp. 1979-1996, 2001. 146
RkJQdWJsaXNoZXIy MTMzNzEzMQ==