Time Dependent Constitutive Behavior and Fracture/Failure Processes, Volume 3

Time Dependent Constitutive Behavior and Fracture/Failure Processes, Volume 3	4
Preface	6
Contents	8
Thermal and Mechanical Characterization of a Healable Polymer	12
Fracture Behavior of Polymeric Foams Under Mixed-Mode Loading	15
Coupled Experimental and Computational Analysis of Fracture Path Selection in PMMA Blocks	23
Procedures for Mixed Mode Fracture Testing of Bonded Beams in a Dual Actuator Load Frame	34
LINEAR VISCOELASTIC BEHAVIOR OF POLY(ETHYLENE THEREPHTALATE) ABOVE Tg AMORPHOUS VISCO-ELASTIC PROPERTY VS CRYSTALLINITY: EXPERIMENTAL AND MICROMECHANICAL MODELING	41
Experimental Study of Voids in High Strength Aluminum Alloys	46
Local Strain Accommodation in Polycrystalline Ni-Base Superalloys	48
Coupled Thermal-Mechanical Experiments for Validation of Pressurized, High Temperature Systems	56
Predictive Simulation of a Validation Forging Using a Recrystallization Model*	58
Characterization of Liquefied Natural Gas Tanker Steel from Cryogenic to Fire Temperatures	64
Nonlocal Microdamage Constitutive Model for High Energy Impacts	66
Impact Testing and Dynamic Behavior of Materials	74
Development of an internal state variable model to describe the mechanical behavior of amorphous polymer and its application to impact testing	82
Examination of Validity for Viscoelastic Split Hopkinson Pressure Bar Method	84
WELDABILITY AND TOUGHNESS EVALUATION OF THE CERAMIC REINFORCED STEEL MATRIX COMPOSITES (TIB2-RSMC)	91
Nonlinear Viscoelastic Nanoindentation of PVAc	99
Theoretical and computational modelling of instrumented indentation of viscoelastic composites	107
Obtaining Viscoelastic Properties from Instrumented Indentation	125
Mechanical Properties Measurement of Sand Grains by Nanoindentation	127
Design and Implementation of Coupled Thermomechanical Failure Experiments	137
The Role of Interface and Reinforcement in the Finite Deformation Response of Polyurethane-Montmorillonite Nanocomposites	139
Time-temperature Superposition and High Rate Response of Thermoplastic Composites and Constituents	144
MEASURING TIME DEPENDENT DIFFUSION IN POLYMER MATRIX COMPOSITES	152
New Strain Rate Dependent Material Model for Fiber Reinforced Composites	154
Effect of Crystallinity and fiber volume fraction on Creep Behavior of Glass Fiber Reinforced Polyamide	164
Hybrid Metal-Ceramic Thermo-oxidation Protection Layer sfor Polymer Matrix Composites	170
Degradation phenomena under water environment of cotton yarn reinforced Polylactic-acid	179
Advanced Accelerated Testing Methodology for Life Prediction of CFRP laminates	187
Dynamic Properties of Foam with Negative Incremental Bulk Modulus	197
A Note on Automated Time-Temperature and Time-Pressure Shifting	203
Application of Fractional Derivatives Models to Time-dependent Materials	216
Tissue- and Microstructural-level Deformation of Aortic Tissue under Viscoelastic/Viscoplastic Loading	225
Strain accumulation process in periodically loaded polymers	230
Viscoelastic and Viscoplastic Mechanical Behavior of Polymeric Nanofibers: An Experimental and Theoretical Approach	236
Effect of Polyacrylate Interlayer Microstructure on the Impact Response of Multi-Layered Polymers	242
Visco-elastic Properties of Carbon Nanotubes and Their Relation to Damping	260
Ballistic Missile Defense System (BMDS) Solutions Using Remendable Polymers	267
Experimental Characterization and Modeling of Shape Memory Material for Downhole Completion Applications	274
Mechanics of Persulfonated Polytetrafluorethylene Proton Exchange Membranes	281
The influence of pressure on the large deformation shear response of a Polyurea	284
Micromechanics models for predicting tensile properties of latex paint films	293
Time Dependent Recovery of Shape Memory Polymers	303
Structural Relaxation near the Glass Transition: Observing Kovacs Kinetic Phenomenology by Mechanical Measurements	309
Creep Mechanisms in Bone and Dentin Via High-Energy X-ray Diffraction	316
High Local Deformation Correlates with Optical Property Change in Cortical Bone	321
Probing Pre-failure Molecular Deformation in Cortical Bone with Fluorescent Dyes	326
The Influence of MgO Particle Size on Composite Bone Cements	331
Small-scale mechanical testing: Applications to bone biomechanics and mechanobiology	337
Determination of Fracturing Toughness of Bamboo Culms	345
Biomechanical Analysis of Ramming Behavior in Ovis Canadensis	348
Deformation and Failure Mode Transition in Hard Biological Composites	356
Measurement of Structural Variations in Enamel Nanomechanical Properties using Quantitative Atomic Force Acoustic Microscopy	364
Influence of Diamond-like Carbon Coatings on the Fatigue Behavior of Spinal Implant Rod	373
Modeling Creep and Fatigue Properties of Bone at Nanoscale Level	380
High-energy X-ray Diffraction Measurement of Bone Deformation During Fatigue	383
Investigation of cyclic impact fatigue, grain-to-grain interaction, and residual stress in zirconia dental materials	387

RkJQdWJsaXNoZXIy MTMzNzEzMQ==