12 R. J. M. Habibur and G. Suhasini 9. Pothnis, JR, Kalyanasundaram, D, and Gururaja, S, “Controlled manipulation of CNTs in glass/epoxy composites with cut-outs using nonuniform electric field,” Advanced Composite Materials, vol. 30, no. 2021, pp. 205–221, 2020, 10. Khan, SU, Pothnis, JR, and Kim, JK, “Effects of carbon nanotube alignment on electrical and mechanical properties of epoxy nanocomposites,” Composites Part A: Applied Science and Manufacturing, vol. 49, pp. 26–34, Jun. 2013, 11. Oliva-Avile´s, AI, Avile´s, F, Sosa, V, Oliva, AI, and Gamboa, F, “Dynamics of carbon nanotube alignment by electric fields,” Nanotechnology, vol. 23, no. 46, p. 465710, Nov. 2012, 12. Monti, M, Natali, M, Torre, L, and Kenny, JM, “The alignment of single walled carbon nanotubes in an epoxy resin by applying a DC electric field,” Carbon, vol. 50, no. 7, pp. 2453–2464, Jun. 2012, 13. Amani, AM, Hashemi, SA, Mousavi, SM, Abrishamifar, SM, Vojood, A, Amani, AM, Hashemi, SA, Mousavi, SM, Abrishamifar, SM, and Vojood, A, “Electric Field Induced Alignment of Carbon Nanotubes: Methodology and Outcomes,” in Carbon Nanotubes - Recent Progress, IntechOpen, 2017. 14. Zhu, Y-F, Ma, C, and Zhang, W, “Alignment of multiwalled carbon nanotubes in bulk epoxy composites via electric field,” J. Appl. Phys, vol. 105, p. 54319, 2009, 15. Pothnis, JR, Gururaja, S, and Kalyanasundaram, D, “Mechanics of Advanced Materials and Structures Development and characterization of electric field directed preferentially aligned CNT nanocomposites,” 2019, 16. Baithalu, R and Mishra, SR, “On optimizing shear rate analysis for the water-based CNT micropolar nanofluids via an elongating surface: response surface methodology combined with ANOVA test,” J Therm Anal Calorim, vol. 148, no. 24, pp. 14275–14294, Dec. 2023, 17. Silva, RM, Fernandes, AJS, Ferro, MC, Pinna, N, and Silva, RF, “Vertically aligned N-doped CNTs growth using Taguchi experimental design,” Applied Surface Science, vol. 344, pp. 57–64, Jul. 2015, 18. Kumar, D and Gururaja, S, “Abrasive waterjet machining of Ti/CFRP/Ti laminate and multi-objective optimization of the process parameters using response surface methodology,” Journal of Composite Materials, vol. 54, no. 13, pp. 1741–1759, Jun. 2020, 19. Dhanawade, A and Kumar, S, “Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet,” Journal of Composite Materials, vol. 51, no. 24, pp. 3373–3390, Oct. 2017, 20. Du, JR, Zheng, J, Ma, K, Du, C, and Zhou, D, “Electric Field-induced Orientation of Carbon Nanomaterials in Dispersions,” ChemistrySelect, vol. 9, no. 6, p. e202303547, 2024,
RkJQdWJsaXNoZXIy MTMzNzEzMQ==