Model Initialization in Real Time Hybrid Testing for Experimental Detection of Isolated Branches 121 Acknowledgments This work was carried out as part of the COMET Centre InTribology (FFG no. 906860), a project of the “Excellence Centre for Tribology” (AC2T research GmbH). InTribology is funded within the COMET – Competence Centres for Excellent Technologies Programme by the federal ministries BMK and BMAW as well as the federal states of Niedero¨sterreich and Vorarlberg based on financial support from the project partners involved. COMET is managed by The Austrian Research Promotion Agency (FFG). References 1. Habib, G., Detroux, T., Viguie´, R., Kerschen, G., ,,Nonlinear generalization of Den Hartog?s equal-peak method“, Mech. Syst. Signal Process., Bd. 52–53, S. 17–28, Feb. 2015, doi:10.1016/j.ymssp.2014.08.009. 2. Hochrainer, M. J., “Real-Time Hybrid Testing: Challenges and Experiences from a Teaching Point of View”. In: Mains M., Dilworth B. (eds) Topics in Modal Analysis & Testing, vol. 9, Conference Proceedings of the Society for Experimental Mechanics Series. Springer, 2019. 3. Hochrainer, M. J., Puhwein, A. M., “Investigation of Nonlinear Dynamic Phenomena Applying Real-Time Hybrid Simulation.” In: G. Kerschen (ed.), Nonlinear Structures and Systems, Volume 1, Conference Proceedings of the Society for Experimental Mechanics Series, 2019, https://doi.org/10.1007/978-3-030-12391-8 16. 4. Saouma, V., Sivaselvan, M., Hybrid Simulation: Theory, Implementation and Applications. Taylor & Francis Ltd., 2008. 5. Bursi, O.S., Wagg, D., “Modern testing techniques for structural systems.” In: Dynamics and Control, CISM International Centre for Mechanical Sciences, vol. 502. Springer, 2008. 6. Zhao, J., French, C., Shield, C., Posbergh, T., ”Considerations for the development of real-time dynamic testing using servo-hydraulic actuation”, Earthquake Engineering & Structural Dynamics vol.32/11, pp.1773–1794, 2003. 7. Gawthrop, P.J., Wallace, M.I., Neild, S.A., Wagg, D.J., “Robust real-time substructuring techniques for under-damped systems”, Structural Control & Health Monitoring, vol. 14/4, pp.591–608, 2007. 8. Bonnet, P.A. , Lim, C.N., Williams, M.S., Blakeborough, A., Neild, S.A. Stoten, D.P., Taylor, C.A.,”Real-time hybrid experiments with Newmark integration MCSmd outer-loop control and multi-tasking strategies”, Earthquake Engineering & Structural Dynamics vol. 36/1, pp.119–141, 2007. 9. Chen, C., Ricles, J.M., ”Analysis of actuator delay compensation methods for real-time testing”, Engineering Structures vol. 31/11, pp. 2643–2655, 2009. 10. Chae, Y., Kazemibidokhti, K. , Ricles, J.M. , “Adaptive time series compensator for delay compensation of servo-hydraulic actuator systems for real-time hybrid simulation”, Earthquake Engineering & Structural Dynamics, vol. 42/11, pp.1697–1715, 2013. 11. Chen, P.-C. , Chang, C.-M. , Spencer, B.F., Tsai, K.-C. , “Adaptive model-based tracking control for real-time hybrid simulation”, Bull. Earthquake Engineering vol. 13/6, pp. 1633–1653, 2015. 12. Najafi, A., Spencer, B.F., “Adaptive model reference control method for real-time hybrid simulation”, Mechanical Systens & Signal Processing, vol.132 pp.183–193, 2019. 13. Tsokanas N., Pastorino, R. , Stojadinovic´, B., “Adaptive model predictive control for actuation dynamics compensation in real-time hybrid simulation”, Mechanism and Machine Theory, vol.172, https://doi.org/10.1016/j.mechmachtheory.2022. 104817 14. Insam, C., Go¨ldeli, M., Klotz, T., Rixen, D. J., ,,Comparison of Feedforward Control Schemes for Real-Time Hybrid Substructuring (RTHS)“, inDynamic Substructures, Volume 4, pp. 1–14, 2021. doi:10.1007/978-3-030-47630-4 1. 15. Witteveen, W., Koller, L., Penninger, D., “Non-simultaneous real-time hybrid simulation of a numerical and experimental mechanical system with moderate nonlinearities via iterative coupling based on Frequency Response Functions”, Mechanical Systems and Signal Processing, vol. 163, 2022. https://doi.org/10.1016/j.ymssp.2021.108055 16. Insam, C., Kist, A., Rixen, D. J., “High Fidelity Real-Time Hybrid Substructure Testing Using Iterative Learning Control”, ISR 2020; 52th International Symposium on Robotics, 2020. ISBN - 978-3-8007-5428-1 17. Wang, Y., Gao, F., Doyle, F. J., “Survey on iterative learning control, repetitive control, and run-to-run control”, Journal of Process Control vol. 19, pp. 1589–1600, 2009. 18. Xu, J.-X., Tan, Y., “Linear and Nonlinear Iterative Learning Control”, Springer, 2003. 19. Bristow, D.A., Baron, K.L., Alleyne, A.G., Iterative Learning Control, in Levine, W.S. (ed.), The control handbook, CRC press, 2011. 20. Hochrainer, M.J., Puhwein, A.M., Design and Characterization of a Multi-purpose Duffing Oscillator with Flexible Parameter Selection, In: Epp, D.S. (eds) Special Topics in Structural Dynamics & Experimental Techniques, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, 2021, https://doi.org/10.1007/978-3-030-47709-7 7 21. Puhwein, A.M., Hochrainer, M.J., Investigation of Multiple Branches in Nonlinear Oscillators Using Real-Time Hybrid Testing. In: Allen, M., D’Ambrogio, W., Roettgen, D. (eds) Dynamic Substructures, Volume 4. SEM 2023. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-031-36694-9 4 22. Puhwein, A.M., Hochrainer, M.J., Investigation of Isolated Branches in Nonlinear Oscillators Using Real-Time Hybrid Testing, W. D’Ambrogio et al. (eds.), Dynamic Substructures, Vol. 4, SEM 2025 Conference Proceedings of the Society for Experimental Mechanics, Series, https://doi.org/10.1007/978-3-031-68897-3 6 23. Nelles, O., “Nonlinear System Identification”, Springer, 2010. 24. Eykhoff, P., “System Identification”, Wiley, 1974.
RkJQdWJsaXNoZXIy MTMzNzEzMQ==