168 S. S. Christensen et al. 7. Brincker, R., Zhang, L., Andersen, P.: Modal identification from ambient responses using frequency domain decomposition. In: International Modal Analysis Conference, pp. 625–630 (2000) 8. Leuridan, J.M.: Some direct parameter model identification methods applicable for multiple input modal analysis. Ph.D. thesis, University of Cincinnati (1984) 9. Zhang, L., Kanda, H., Brown, D.L., Allemang, R.J.: A polyreference frequency method for modal parameter identification. In: American Society of Mechanical Engineers Design Engineering Technical Conference, pp. 1237–1245 (1985) 10. Ubertini, F., Gentile, C., Materazzi, A.L.: Automated modal identification in operational conditions and its application to bridges. J. Eng. Struct. 46, 264–278 (2012) 11. Rainieri, C., Fabbrocino, G.: Development and validation of an automated operational modal analysis algorithm for vibration-based monitoring and tensile load estimation. Mech. Syst. Signal Process. 60–61, 512–534 (2015) 12. Devriendt, C., Magalhães, F., Weijtjens, W., De Sitter, G., Cunha, A., Guillaume, P.: Structural health monitoring of offshore wind turbines using automated operational modal analysis. J. Struct. Health Monitor. 13(6), 644–659 (2014) 13. Cardoso, R., Cury, A., Barbosa, F.: A robust methodology for modal parameters estimation applied to SHM. Mech. Syst. Signal Process. 95, 24–41 (2017) 14. Scionti, M., Lanslots, J., Goethals, I., Vecchio, A., Van der Auweraer, H., Peeters, B., De Moor, B.: Tools to improve detection of structural changes from in-flight flutter data. In: International Conference on Recent Advances in Structural Dynamics (2004) 15. Allessandro, F.: Modal parameters estimation in the Z-domain. Mech. Syst. Signal Process. 23, 217–225 (2009) 16. Bakir, P.G.: Automation of the stabilization diagrams for subspace based system identification. J. Expert Syst. Appl. 38(12), 14390–14397 (2011) 17. Auweraer, H., Guillaume, P., Verboven, P., Vanlanduit, S.: Application of a fast-stabilizing frequency domain parameter estimation method. ASME J. Dyn. Syst. Meas. Control 123(4), 651–658 (2001) 18. Brown, D.L., Allemang, R.J., Zimmerman, R., Mergeay, M.: Parameter estimation techniques for modal analysis. SAE Trans. 88(1), 828–846 (1979) 19. Peeters, P., Auweraer, H., Guillaume, P., Leuridan, J.: The PolyMAX frequency-domain method: a new standard for modal parameter estimation? Shock Vib. 11(3–4), 395–409 (2004) 20. Cauberghe, B.: Applied frequency-domain system identification techniques in the field of operational modal analysis. Ph.D. thesis, Vrije University Brussel (2003) 21. Guillaume, P., Verboven, P., Vanlanduit, S.: Frequency-domain maximum likelihood identification of modal parameters with confidence intervals. In: Proceedings of the International Conference on Noise and Vibration Engineering (1998) 22. Orlowitz, E., Brandt, A.: Comparison of experimental and operational modal analysis on a laboratory test plate. Measurement 102, 121–130 (2017) 23. Christensen, S.S., Brandt, A.: Automatic operational modal analysis using statistical modelling of pole locations. In: Proceedings of the International Conference on Noise and Vibration Engineering (2018) 24. Ahlin, K., Magnevall, M., Josefsson, A.: Simulation of forced response in linear and nonlinear mechanical systems using digital filters. In: Proceedings of the International Conference on Noise and Vibration Engineering (2006) 25. Brandt, A.: Noise and Vibration Analysis – Signal Analysis and Experimental Procedures. Wiley (2011) https://onlinelibrary.wiley.com/doi/ book/10.1002/9780470978160 26. Orlowitz, E., Brandt, A.: Influence of noise in correlation function estimates for operational modal analysis. In: Proceedings of International Modal Analysis Conference (2018) 27. Christensen, S.S., Brandt, A.: Parameter study of statistics of modal parameter estimates using automated operational modal analysis. In: Proceedings of the 37th International Modal Analysis Conference (2019) 28. Orlowitz, E.: Effects of sensor count on damping estimates from operational modal analysis. In: Proceedings of International Modal Analysis Conference, vol. 8, pp. 357–364 (2019) Silas Sverre Christensen finished his masters in Structural Engineering in 2015 after which he got employed at a structural engineering consultancy company (name: COWI). In the summer 2017 he pursued a PhD. The tittle of the PhD project is: “Vibration Monitoring of Offshore Structures using Virtual Sensing techniques”.
RkJQdWJsaXNoZXIy MTMzNzEzMQ==